| Parameter | Description |
|
ARM_LENGTH
| Arm Length of the Tool |
|
ARM_PIVOT_OFFSET
| Lateral Offset of the Arm Pivot from the Tool Axis |
|
BITSIZ
| Bit Size from BS in CONS Table |
|
BROAD_WLENGTH
| Unfocused searching window in flow-lines linking |
|
CORINT
| Correlation interval |
|
CORRELATION_CUTOFF
| Correlation Cutoff for Dip Computation (between 0.0 and 1.0) |
|
CORRELATION_MATRIX
| Definition of Correlation Links between Sensors for Dip Computation |
|
CROSSING_LIMITATION
| Allow to avoid dip crossing |
|
CUTOFF
| Percentage of Features To Keep for A Curve in DMDMA |
|
DIP_COMPUTATION_METHOD
| Dip Computation Method to Apply (e.g. MSD, CSB, LOCAL) |
|
DIP_CONTINUITY_FILTER
| Flag to indicate if Classification of Output Dips by Continuity is required |
|
DIP_EVENT_TYPE
| Type of Events to Detect in Local Dip Computation (e.g. PEAK, TROUGH, PEAK_AND_TROUGH) |
|
DIP_STACK_SIZE
| Stack Size for Post-Processing of Dips |
|
DIP_STACKING
| Stack Continuous Dip Option for Post-Processing of Dips |
|
DUMM
| Dummy |
|
FOCUS_DIP_AZIMUTH
| Focus Dip Azimuth |
|
FOCUS_DIP_MAGNITUDE
| Focus Dip Magnitude |
|
FOCUS_DIP_TYPE
| Focusing Dip Type Option (e.g. Fixed Plane, Variable Plane, Normal to Tool Axis) |
|
HORZ_DEC_FLL
| Horizontal Decimation for flow-lines computation |
|
IFLAG
| Integer Flag |
|
INVDIA
| Electrical investigation depth |
|
INVFAC
| Invasion Factor |
|
MAGDEC
| Magnetic Declination At the Field Location |
|
MAX_DEPARTURE_FLL
| Maximum Departure Angle for flow-lines computation |
|
MAX_GAP_FLL
| Maximum number of sensors to be ignored in a row for flow-lines computation |
|
MAX_VARIATION_FLL
| Maximum Variation Angle for flow-lines computation |
|
MIN_APPARENT_DIP
| Minimum Apparent Dip |
|
MIN_FOCUS_DIP_QUALITY
| Minimum Quality to accept Focus Dip (between 1 and 20) |
|
MIN_RELCONTR
| Minimum relative contrast of two flow-lines in same dip |
|
MIN_SEQUENCE_LENGTH
| Minimum number of dips to retain a sequence |
|
MIRDIP
| Mirror Image Dip Tolerance |
|
MIRROR_DIP_REJECTION
| Mirror Dip Rejection (e.g. No Mirror Dip Rejection, Reject Mirror Dip, Reject And Recompute) |
|
MISSING_PAD
| Allow to ignore up to two pads in flow-lines linking |
|
NARROW_WLENGTH
| Focused searching window in flow-lines linking |
|
OPTSPA
| Resampling frequency |
|
OUTPUT_FAST_CHANNEL
| Fast Channel Post-Processing Option (e.g. NO_OUTPUT, OUTPUT_PREPROCESSING, OUTPUT_DERIVATIVE) |
|
PERCENT_LINES
| Proportion of flow-lines used in linking |
|
PLAN_THRESHOLD
| Upper planarity threshold for flow-lines in same dip |
|
PRE_PROCESSING_OPERATOR_LENGTH
| Operator Length for Pre-Processing Transformation (vertical window) |
|
PRE_PROCESSING_OPERATOR_TYPE
| Pre-processing Operator Type to apply (e.g. NONE, SMOOTH, DERIVATIVE) |
|
PRE_PROCESSING_TRANSFORMATION
| Pre-processing Transformation to apply (e.g. NONE, INVERSE, LOG10) |
|
PROFILE_SQUARING
| Gradient Squaring in flow-lines computation |
|
SEARCH_ANGLE
| Angular range to search around focus dip |
|
SELECTED_SENSORS
| List of the Selected Sensors used in BorDip Computation |
|
SEVERE_SORTING
| Severe sorting option in flow-lines computation |
|
STEP
| Step Length between Correlations |
|
SWING_ARM_CORRECTION
| Boolean Flag to indicate whether to apply swing-arm correction |
|
USE_BITSIZE
| Boolean Flag to indicate whether to use Bit Size |
|
USE_SPEED_BUTTON
| Boolean Flag to indicate whether to use Speed Buttons |
|
VERT_DEC_FLL
| Vertical Decimation for flow-lines computation |
|
VSCA
| Vertical Scale |
