| Parameter | Description |
|
CN
| Company Name |
|
CTRY
| Country |
|
DISCR1_CURVE_NAME
| Name of curve used as discriminator 1 |
|
DISCR1_CUTOFF
| Cutoff value for first discriminator curve |
|
DISCR1_OPERATOR
| Cutoff comparison operator for discriminator 1: >, =>, <. <=... |
|
DISCR2_CURVE_NAME
| Name of curve used as discriminator 2 |
|
DISCR2_CUTOFF
| Cutoff value for second discriminator curve |
|
DISCR2_OPERATOR
| Cutoff comparison operator for discriminator 2: >, =>, <. <=... |
|
DISCRIMINATOR_1_CUTOFF
| Cutoff value for first discriminator |
|
DISCRIMINATOR_2_CUTOFF
| Cutoff value for second discriminator |
|
FN
| Field Name |
|
GROSS_POROSITY
| Porosity of an interval averaged over the gross thickness |
|
GROSS_THICKNESS
| Total thickness of the interval, after applying any discriminator cutoffs specified as Initial. |
|
MAX_GAMMA_RAY
| Maximum value of Gamma Ray |
|
MAX_GR_API
| Cutoff value for GR curve |
|
MAX_SHALE_VOLUME_FRACTION
| Maximum value of Shale/Clay volume fraction |
|
MAX_VOL_SHALE_CLAY
| Cutoff value for Vshale or Vclay curve |
|
MAX_WATER_SATURATION
| Cutoff value for Water Saturation curve |
|
MIN_NET_THICKNESS
| Minimum net thickness; beds thinner than this do not contribute to Net Thickness. See MIN_NON_NET_THICKNESS |
|
MIN_NON_NET_THICKNESS
| Minimum non-net thickness; if isolating shale beds are thinner than this, the sand they isolate is considered to contribute to Net Thickness. |
|
MIN_PERMEABILITY
| Cutoff value for Permeability curve |
|
MIN_POROSITY
| Cutoff value for Porosity curve |
|
NET_CUTOFF_ABSENT_FRACTION
| Fraction of the summation interval for which data to apply "Net" cutoff criteria are unavailable. |
|
NET_GROSS_THICKNESS_RATIO
| Ratio of Net_Thickness to Gross_Thickness |
|
NET_PAY_CLAY_VOLUME_FRACTION
| Average clay volume fraction in the net pay portion of the zone interval (thickness weighted arithmetic average). |
|
NET_PAY_CUTOFF_ABSENT_FRACTION
| Fraction of the summation interval for which data to apply "Net_Pay" cutoff criteria are unavailable (including the fraction for which "Net" or "Net_Reservoir" criteria are unavailable). |
|
NET_PAY_FLUSHED_ZONE_WATER_SATURATION
| Average flushed zone water saturation in the net pay portion of the zone (thickness weighted arithmetic average). |
|
NET_PAY_GROSS_THICKNESS_RATIO
| Ratio of Net_Pay_Thickness to Gross_Thickness |
|
NET_PAY_HC_POROSITY_THICKNESS
| Total Net Pay hydrocarbon porosity-thickness for all zones; that portion of Net_Pay_Porosity_Thickness which is hydrocarbon-filled. |
|
NET_PAY_MOVED_HC_POROSITY_THICKNESS
| The net pay moved hydrocarbon volume multiplied by the net pay thickness; the portion of Net Pay Porosity Thickness filled with moved hydrocarbons. |
|
NET_PAY_MOVED_HC_VOLUME_FRACTION
| Net pay moved hydrocarbon volume fraction: moved oil saturation (Sxo-Sw) in the net pay of the zone multiplied by the net pay average porosity. |
|
NET_PAY_PERMEABILITY
| Average permeability in the net pay portion of the zone interval (thickness weighted arithmetic average). |
|
NET_PAY_PERMEABILITY_THICKNESS
| Thickness of the permeable net pay portion of the zone i.e., the product of the Net Pay Thickness and Net Pay Average Permeability |
|
NET_PAY_POROSITY
| Porosity of the Net Pay zone |
|
NET_PAY_POROSITY_THICKNESS
| Total net pay porosity-thickness of the zone interval: the product of Net Pay Thickness and Net Pay Average Porosity |
|
NET_PAY_THICKNESS
| Net Pay thickness, i.e. thickness after applying Shale, Porosity and Water Saturation cutoffs |
|
NET_PAY_WATER_SATURATION
| Average water saturation in the net pay portion of the zone (thickness weighted arithmetic average). |
|
NET_RESERVOIR_CLAY_VOLUME_FRACTION
| Average volume fraction of clay in the Net Reservoir portion of the zone (thickness weighted arithmetic average). |
|
NET_RESERVOIR_CUTOFF_ABSENT_FRACTION
| Fraction of the summation interval for which data to apply "Net_Reservoir" cutoff criteria are unavailable (including the fraction for which "Net" criteria are unavailable). |
|
NET_RESERVOIR_FLUSHED_ZONE_WATER_SATURATION
| Average flushed zone water saturation in the net reservoir portion of the zone (thickness weighted arithmetic average). |
|
NET_RESERVOIR_GROSS_THICKNESS_RATIO
| Ratio of Net_Reservoir_Thickness to Gross_Thickness |
|
NET_RESERVOIR_PERMEABILITY
| Average permeability in the net reservoir portion of the zone interval (thickness weighted arithmetic/geometric/harmonic average). |
|
NET_RESERVOIR_PERMEABILITY_THICKNESS
| The product of the Net Reservoir Thickness and Net Reservoir Average Permeability. |
|
NET_RESERVOIR_POROSITY
| Average porosity in the Net Reservoir portion of the zone (thickness weighted arithmetic average). |
|
NET_RESERVOIR_POROSITY_THICKNESS
| Total pore thickness of the zone; i.e. the product of Porosity and Net_Reservoir_Thickness. |
|
NET_RESERVOIR_THICKNESS
| Total thickness of the porous portion of the zone; i.e. the footage which satisfies the Net Thickness conditions and which has porosity suitable to be a potential reservoir. |
|
NET_RESERVOIR_WATER_SATURATION
| Average water saturation in the net reservoir portion of the zone (thickness weighted arithmetic average). |
|
NET_SHALE_THICKNESS
| Shale thickness: difference between Gross Thickness and Net Thickness |
|
NET_THICKNESS
| Total Net thickness, i.e. thickness after applying Shale cutoff |
|
PERM_AVG_METHOD
| Method used for averaging permeability - ARITHMETIC or GEOMETRIC |
|
PERMEABILITY_CURVE_NAME
| Name of curve used as permeability cutoff |
|
POROSITY_CURVE_NAME
| Name of curve used as porosity cutoff |
|
PROJECT_NAME
| Name of user project |
|
SAND_VOLUME_FRACTION
| Percentage of sand (non shale) |
|
SHALE_VOLUME_FRACTION
| Percentage of shale |
|
STAT
| State or Province |
|
SW_CURVE_NAME
| Name of curve used as water saturation cutoff |
|
VCLAY_CURVE_NAME
| Name of curve used as clay volume cutoff |
|
WELL_OPERATOR
| Name of the well operator |
|
WN
| Well Name |
