| Parameter | Description |
|
BODA
| Back-off Depth Actual |
|
BODD
| Back-off Depth Desired |
|
BPUL
| Back-off Pull |
|
BTOR
| Back-off Torque |
|
BTWS
| Theoretical Weight After Back-off |
|
BWLW
| Back-off Window Lower Width (displacement below BODD) |
|
BWUW
| Back-off Window Upper Width (displacement above BODD) |
|
CASD
| Casing Diameter |
|
CASS
| Casing Shoe |
|
CURVE_MASK
| Curve Mask Flag. |
|
DINC
| Customer View Depth Increment (3IN, 6IN, 1FT or 2FT) |
|
DSBD
| Depth at Drill String Bottom |
|
DSPO
| Depth of Estimated Stuck Point |
|
ELEMENT_ID
| Element Inner Diameter |
|
ELEMENT_LENGTH
| Element Length |
|
ELEMENT_LW
| Element Linear Weight |
|
ELEMENT_MATERIAL
| Element Material |
|
ELEMENT_NUM
| Element Number |
|
ELEMENT_OD
| Element Outer Diameter |
|
ELEMENT_TOP_DEPTH
| Element Top Depth |
|
ELEMENT_TYPE
| Element Type |
|
FPIT_CAL_GAIN_RSTR
| FPIT Gain of RSTR |
|
FPIT_CAL_GAIN_RTOR
| FPIT Gain of TORQ |
|
FPIT_CAL_GAIN_STRH
| FPIT Gain of STRH |
|
FPIT_CAL_GAIN_TORQ
| FPIT Gain of TORQ |
|
FPIT_CAL_OFFSET_RSTR
| Calibration offset of RSTR |
|
FPIT_CAL_OFFSET_RTOR
| Calibration offset of RTOR |
|
FPIT_CAL_OFFSET_STRH
| Calibration offset of STRH |
|
FPIT_CAL_OFFSET_TORQ
| Calibration offset of TORQ |
|
HYDP
| Hydrostatic Pressure |
|
KDV1
| Kick-Off Deviation 1 |
|
KDV2
| Kick-Off Deviation 2 |
|
KDV3
| Kick-Off Deviation 3 |
|
KDV4
| Kick-Off Deviation 4 |
|
KDV5
| Kick-Off Deviation 5 |
|
KICK_OFF_DEPTH
| Kick-off Depth |
|
KICK_OFF_DEVIATION
| Kick-off Deviation |
|
KICK_OFF_NUM
| Kick-off Number |
|
KOD1
| Kick-Off Depth 1 |
|
KOD2
| Kick-Off Depth 2 |
|
KOD3
| Kick-Off Depth 3 |
|
KOD4
| Kick-Off Depth 4 |
|
KOD5
| Kick-Off Depth 5 |
|
KPTN
| Kick-off Parameter Total Number |
|
MINT
| Minimum Number of Turns |
|
MLHT
| Maximum Left Hand Turns |
|
MNFL
| Minimum Free Length |
|
MODE_FPIT
| FPIT Operation Mode |
|
MPUL
| Maximum Safe Pull |
|
MRHT
| Maximum Right Hand Turns |
|
MSR
| Maximum Stretch Reading |
|
MTR
| Maximum Torque Reading |
|
MW
| Mud Weight |
|
OMFL
| Overpull for Minimum Free Length |
|
OMIN
| Overpull Minimum |
|
OVRP
| Overpull |
|
PRIS
| Number of Primacord Strands |
|
PTOR
| Pipe Torque Rigidity |
|
PWEA
| Pipe Weight in Air |
|
PWEM
| Pipe Weight in Mud |
|
RRPO
| Recommended Release Position |
|
RSPO
| Recommended Starting Position |
|
RSTR_PLUS_REF
| Stretch Test Jig Plus Reference |
|
RSTR_ZERO_REF
| Stretch Test Jig Zero Reference |
|
RTOR_PLUS_REF
| Torque Test Jig Plus Reference |
|
RTOR_ZERO_REF
| Torque Test Jig Zero Reference |
|
SMFL
| Stretch for Minimum Free Length |
|
STATION_DEPTH
| Station Depth |
|
STATION_DEPTH_PLOT
| Station Depth Plot |
|
STATION_ELEMENT_LW
| Station Element Linear Weight |
|
STATION_ELEMENT_TYPE
| Station Element Type |
|
STATION_NUMBER
| Station Number |
|
STATION_OVRP
| Station Overpull |
|
STATION_PFST
| Station Percent Free in Stretch |
|
STATION_PFST_PLOT
| Station Percent Free Stretch Plot |
|
STATION_PFST_PLOT_STATUS
| Station Percent Free Stretch Plot Status |
|
STATION_PFTO
| Station Percent Free in Torque |
|
STATION_PFTO_PLOT
| Station Percent Free Torque Plot |
|
STATION_PFTO_PLOT_STATUS
| Station Percent Free Torque Plot Status |
|
STATION_STRH
| Station Stretch |
|
STATION_STRH_TIME
| Station Stretch Time |
|
STATION_TORQ
| Station Torque |
|
STATION_TORQ_TIME
| Station Torque Time |
|
STATION_TURN
| Station Turn |
|
STRH_PLUS_REF
| Stretch Test Jig Plus Reference |
|
STRH_ZERO_REF
| Stretch Test Jig Zero Reference |
|
TORQ_PLUS_REF
| Torque Test Jig Plus Reference |
|
TORQ_ZERO_REF
| Torque Test Jig Zero Reference |
|
TPFT
| Theoretical Percent Free in Torque at BODD |
|
TURN
| Number of Turns |
|
WDBS
| Weight going Down before Sticking |
|
WTRV
| Weight of Traveling Block |
|
WUBS
| Weight going Up before Sticking |
