Mnemonics, Tools, M10825


CodeM10825
TechnologyMWD
DisciplineDrilling
MethodMWD
DescriptionPowerPulse 8.25" Tool

Related channels
ChannelDescription
ANGX Quadrant Calibration Angle
AZIM_CONT Continuous Hole Azimuth
AZIM_EU EU Converted Downhole-calculated Azimuth
BAUDE Telemetry Baud Rate Code Extended
BUR_MWD_CONT Continuous MWD Build Up Rate
BX_ROT Rotating Magnetometer, X-Axis
BY_ROT Non-Stationary Magnetometer, Y-Axis
BZ_ROT Non-Stationary Magnetometer, Z-Axis
CRPM Collar Rotational Speed
CRPM_35 Collar Rotational Speed 35s Moving Average
CRPM_WDP Collar Rotational Speed Waveform DPoint
CUREDT Current Equivalent Drilling Time in 10 Hours
DEPTH_DNI Depth of the Direction and Inclination Sensor
DLMSG Downlink Command
DLS_MWD_CONT Continuous MWD Dogleg Severity
DMSE Downhole Mechanical Specific Energy
DTOR Downhole Torque (MWD)
DTOR_EU Uncorrected Downhole Torque in Engineering Units
DWOB Downhole Weight on Bit
DWOB_EU Uncorrected Downhole Weight on Bit in Engineering Units
DWOB_RAW Downhole Weight on Bit with Offset
GAMMA_10 TeleScope Raw Gamma Ray (10 bits) in Recorded Mode
GAMMA_CPS TeleScope Raw Gamma Ray in Recorded Mode
GAMMA_EXT TeleScope Raw Gamma Ray (9 bits) in Recorded Mode
GR Gamma Ray
GR_CONF Gamma Ray Bit Confidence
GRR Raw Gamma Ray
GTF Gravity Toolface Angle
GX_ROT Continuous Rotational Gravity X-axis
GY_ROT Non-Stationary Accelerometer, Y-Axis
GZ_ROT Non-Stationary Accelerometer, Z-Axis
INCL_CONT Continuous Inclination (Hole Deviation)
INCL_EU EU Converted Downhole-calculated Inclination
INCL_RAW Uncorrected Survey Station Inclination
MODFREQE Modulator Carrier Frequency Code Extended
MTF Magnetic Toolface Angle
NRPM_RT Negative Rotation Indicator
PRECNUM Downlink Precursor
ROT_MWD_CONT Continuous MWD Rate Of Turn
SBX Magnetic X-Axis Reading, Stationary
SBY Magnetic Y-Axis Reading, Stationary
SBZ Magnetic Z-Axis Reading, Stationary
SDEP_RAW Unmodified Survey Station Depth
SGX Gravity X-Axis Reading, Stationary
SGY Gravity Y-Axis Reading, Stationary
SGZ Gravity Z-Axis Reading, Stationary
SHK3TIME Time at Shock Level 3
SHK3TM_RT Time at Shock Level 3
SHKPK Shock Peak
SHKPK_WD Shock Peak Width
SHKR Shock Rate
SHKRATE_RT Shock Rate, Real-Time
SHKRSK Shock Risk
SHOCK_RAW Combined Shock Risk and Shock Peak
SHOCKS_ACC Total Shocks accumulated over tool lifetime
STAT_HSTEMP Static Heatsink Temperature
STICK Stick Slip Indicator
STICKRATIO Stick Ratio
STKSVRTY Stick Severity
STKSVRTY_RT Stick Severity
STNTCOR Survey Station Total Azimuth Correction
STUCK_RT Percent Time Stuck
SVY_DESC Survey Station Description
SVY_SOURCE Survey Station Source Tool
SVY_USAGE Survey Usage Limitations Indicator
TEMP_DNI Direction and Inclination Sensor Temperature
TOOLB Tool Magnetometer Magnitude from the Long Survey Axes
TOOLBYZ Root-Mean-Square of the Long Survey By and Bz Axes
TOOLG Tool Gravity Magnitude from the Long Survey Axes
TOOLGYZ Root-Mean-Square of the Long Survey Gy and Gz Axes
TRPM MWD Turbine Rotation Speed
TSTA Tool Status
VIB_LAT Transverse RMS Vibration
VIB_TOR Torsional RMS Vibration
VIB_X RMS Vibration, X-Axis
VIB_Y RMS Vibration, Y-Axis
VIB_Z RMS Vibration, Z-Axis
VIBX_RT RMS Vibration, X-Axis
VIBY_RT RMS Vibration, Y-Axis
VIBZ_RT RMS Vibration, Z-Axis

Related parameters
ParameterDescription
BOT_SAVSUB_LEN Lower Saver Sub Length
COMB_TOOL_LEN Total Length
DTOF DTOR Offset
DTOR_OFFSET DTOR Offset
DWOB_BETA DWOB Beta Pressure Correction Factor
DWOB_OFFSET DWOB Offset
DWOB_ZEROTOOLP DWOB Differential Pressure Drop at Zero Weight-on-Bit
DWOF DWOB Offset
GR_SRC GR Input Channel Name
LOWER_STAB Lower Stabilizer
LOWER_STAB_LEN Lower Blade Length
LOWER_STAB_MID Lower Blade Mid-Point Offset
LOWER_STAB_OD Lower Blade OD
ROP_COLLAR_POS ROP to Bottom of Collar
ROP_TOOL_POS ROP to Tool Bottom (with Saver Sub)
STICKR_RPM_SEL StickSlip Ratio RPM Selection
TFO Toolface Angle Offset
TOP_SAVSUB_LEN Upper Saver Sub Length
TOTAL_SHOCKS Total Shocks
UPPER_STAB Upper Stabilizer
UPPER_STAB_LEN Upper Blade Length
UPPER_STAB_MID Upper Blade Mid-Point Offset
UPPER_STAB_OD Upper Blade OD


Return to Curve Mnemonic Dictionary