| Channel | Description |
|
ANGX
| Quadrant Calibration Angle |
|
AZIM_CONT
| Continuous Hole Azimuth |
|
AZIM_EU
| EU Converted Downhole-calculated Azimuth |
|
BAUDE
| Telemetry Baud Rate Code Extended |
|
BUR_MWD_CONT
| Continuous MWD Build Up Rate |
|
BX_ROT
| Rotating Magnetometer, X-Axis |
|
BY_ROT
| Non-Stationary Magnetometer, Y-Axis |
|
BZ_ROT
| Non-Stationary Magnetometer, Z-Axis |
|
CRPM
| Collar Rotational Speed |
|
CRPM_35
| Collar Rotational Speed 35s Moving Average |
|
CRPM_WDP
| Collar Rotational Speed Waveform DPoint |
|
CUREDT
| Current Equivalent Drilling Time in 10 Hours |
|
DEPTH_DNI
| Depth of the Direction and Inclination Sensor |
|
DLMSG
| Downlink Command |
|
DLS_MWD_CONT
| Continuous MWD Dogleg Severity |
|
DMSE
| Downhole Mechanical Specific Energy |
|
DTOR
| Downhole Torque (MWD) |
|
DTOR_EU
| Uncorrected Downhole Torque in Engineering Units |
|
DWOB
| Downhole Weight on Bit |
|
DWOB_EU
| Uncorrected Downhole Weight on Bit in Engineering Units |
|
DWOB_RAW
| Downhole Weight on Bit with Offset |
|
GAMMA_10
| TeleScope Raw Gamma Ray (10 bits) in Recorded Mode |
|
GAMMA_CPS
| TeleScope Raw Gamma Ray in Recorded Mode |
|
GAMMA_EXT
| TeleScope Raw Gamma Ray (9 bits) in Recorded Mode |
|
GR
| Gamma Ray |
|
GR_CONF
| Gamma Ray Bit Confidence |
|
GRR
| Raw Gamma Ray |
|
GTF
| Gravity Toolface Angle |
|
GX_ROT
| Continuous Rotational Gravity X-axis |
|
GY_ROT
| Non-Stationary Accelerometer, Y-Axis |
|
GZ_ROT
| Non-Stationary Accelerometer, Z-Axis |
|
INCL_CONT
| Continuous Inclination (Hole Deviation) |
|
INCL_EU
| EU Converted Downhole-calculated Inclination |
|
INCL_RAW
| Uncorrected Survey Station Inclination |
|
MODFREQE
| Modulator Carrier Frequency Code Extended |
|
MTF
| Magnetic Toolface Angle |
|
NRPM_RT
| Negative Rotation Indicator |
|
PRECNUM
| Downlink Precursor |
|
ROT_MWD_CONT
| Continuous MWD Rate Of Turn |
|
SBX
| Magnetic X-Axis Reading, Stationary |
|
SBY
| Magnetic Y-Axis Reading, Stationary |
|
SBZ
| Magnetic Z-Axis Reading, Stationary |
|
SDEP_RAW
| Unmodified Survey Station Depth |
|
SGX
| Gravity X-Axis Reading, Stationary |
|
SGY
| Gravity Y-Axis Reading, Stationary |
|
SGZ
| Gravity Z-Axis Reading, Stationary |
|
SHK3TIME
| Time at Shock Level 3 |
|
SHK3TM_RT
| Time at Shock Level 3 |
|
SHKPK
| Shock Peak |
|
SHKPK_WD
| Shock Peak Width |
|
SHKR
| Shock Rate |
|
SHKRATE_RT
| Shock Rate, Real-Time |
|
SHKRSK
| Shock Risk |
|
SHOCK_RAW
| Combined Shock Risk and Shock Peak |
|
SHOCKS_ACC
| Total Shocks accumulated over tool lifetime |
|
STAT_HSTEMP
| Static Heatsink Temperature |
|
STICK
| Stick Slip Indicator |
|
STICKRATIO
| Stick Ratio |
|
STKSVRTY
| Stick Severity |
|
STKSVRTY_RT
| Stick Severity |
|
STNTCOR
| Survey Station Total Azimuth Correction |
|
STUCK_RT
| Percent Time Stuck |
|
SVY_DESC
| Survey Station Description |
|
SVY_SOURCE
| Survey Station Source Tool |
|
SVY_USAGE
| Survey Usage Limitations Indicator |
|
TEMP_DNI
| Direction and Inclination Sensor Temperature |
|
TOOLB
| Tool Magnetometer Magnitude from the Long Survey Axes |
|
TOOLBYZ
| Root-Mean-Square of the Long Survey By and Bz Axes |
|
TOOLG
| Tool Gravity Magnitude from the Long Survey Axes |
|
TOOLGYZ
| Root-Mean-Square of the Long Survey Gy and Gz Axes |
|
TRPM
| MWD Turbine Rotation Speed |
|
TSTA
| Tool Status |
|
VIB_LAT
| Transverse RMS Vibration |
|
VIB_TOR
| Torsional RMS Vibration |
|
VIB_X
| RMS Vibration, X-Axis |
|
VIB_Y
| RMS Vibration, Y-Axis |
|
VIB_Z
| RMS Vibration, Z-Axis |
|
VIBX_RT
| RMS Vibration, X-Axis |
|
VIBY_RT
| RMS Vibration, Y-Axis |
|
VIBZ_RT
| RMS Vibration, Z-Axis |
