| Channel | Description |
|
AAI
| Angular Acceleration Indicator |
|
AMP_CT
| Coarse Tuning Amplitude |
|
BBC_SM1
| Burst Background Correction, Sub-Measurement 1 |
|
BBC_SM2
| Burst Background Correction, Sub-Measurement 2 |
|
BBC_SM3
| Burst Background Correction, Sub-Measurement 3 |
|
BBC_SM4
| Burst Background Correction, Sub-Measurement 4 |
|
BBC_SM5
| Burst Background Correction, Sub-Measurement 5 |
|
BDR_SM1
| Bending Dependent Ringing Correction, Sub-Measurement 1 |
|
BDR_SM2
| Bending Dependent Ringing Correction, Sub-Measurement 2 |
|
BDR_SM3
| Bending Dependent Ringing Correction, Sub-Measurement 3 |
|
BDR_SM4
| Bending Dependent Ringing Correction, Sub-Measurement 4 |
|
BDR_SM5
| Bending Dependent Ringing Correction, Sub-Measurement 5 |
|
BFV_ANT2
| Antenna 2 Bound Fluid Volume |
|
BFV_ANT2_DH
| Antenna 2 Bound Fluid Volume, Calculated Downhole |
|
BFV_DH
| Bound Fluid Volume, Calculated Downhole |
|
BURST_BACK
| Burst Background Offset |
|
CR_ANT_Q
| Ratio of Antenna Quality Factor between Logging and Master Calibration |
|
CR_FREQ
| Ratio of Radio Pulse Frequency between Logging and Master Calibration |
|
CR_GAIN
| Ratio of Environmental Gain Measurements between Logging and Master Calibration |
|
CR_LOOP
| Ratio of Loop Measurement between Logging and Master Calibration |
|
CR_SYS
| Ratio of System Gain Measurements between Logging and Master Calibration |
|
CR_TEMP
| Ratio of Temperature between Logging and Master Calibration |
|
DATA_CT
| Coarse Tuning Data |
|
DMRP_ANT2
| Density-Magnetic Resonance Corrected Porosity for Antenna 2 |
|
ECH_AMP_R_ERR
| Error on Reconstructed R-Component Echo Amplitudes |
|
ECH_AMP_R_REC
| Reconstructed R-Component Echo Amplitudes |
|
ECH_R_A2
| Raw Antenna 2 R-Component Echo Amplitudes |
|
ECH_R_A2_CAL
| Spin Dynamic and Environment Corrected Antenna 2 Echo R Amplitudes |
|
ECH_R_A2_SD
| Raw Antenna 2 R-Component Echo Amplitudes Sliding Mode |
|
ECH_R_A2_SL
| Raw Antenna 2 R-Component Echo Amplitudes Station Mode |
|
ECH_X_A2
| Raw Antenna 2 X-Component Echo Amplitudes |
|
ECH_X_A2_CAL
| Spin Dynamic and Environment Corrected Antenna 2 Echo X Amplitudes |
|
ECH_X_A2_SD
| Raw Antenna 2 X-Component Echo Amplitudes Sliding Mode |
|
ECH_X_A2_SL
| Raw Antenna 2 X-Component Echo Amplitudes Station Mode |
|
ENOISE
| Environmental Noise per Echo, Averaged over Sub-Measurements |
|
FFV_ANT2
| Antenna 2 Free Fluid Volume |
|
FFV_ANT2_DH
| Antenna 2 Free Fluid Volume, Calculated Downhole |
|
FFV_DH
| Free Fluid Volume, Calculated Downhole |
|
FORM_TEMP
| Formation Temperature |
|
GAIN_ENV
| Environmental Gain |
|
IFFV_PIPS
| Integrated Free Fluid Volume Pips |
|
IKTIM_PIPS
| Integrated Coates-Timur Permeability Pips |
|
KSDR
| SDR Permeability |
|
KSDR_ANT2
| Antenna 2 Permeability Computed Using SDR Model |
|
KTDMR_ANT2
| MR Permeability Using DMR Porosity in Timur-Coates Model for Antenna 2 |
|
KTIM
| Timur/Coates Permeability |
|
KTIM_ANT2
| Antenna 2 Permeability Computed Using Timur-Coates Model |
|
LAT_AMP_DH
| Average Amplitude of Tool Lateral Motion, Downhole |
|
LAT_DISP
| Tool Average Lateral Displacement |
|
LAT_VEL
| Tool Average Lateral Velocity |
|
LAT_VEL_DH
| Average Velocity of Tool Lateral Motion, Downhole |
|
MBF_3MS
| Magnetic Resonance Bound Fluid Volume using a 3ms Cutoff |
|
MINUS_12V
| -12V Volt Power Supply Voltage |
|
MR_RT_LAG
| Combined Record Rate and Stacking Level Used to Correct MR Measurement Timestamps |
|
MR_TEMP_USED
| Temperature Used in MR Computations |
|
MRP_ANT2
| Antenna 2 Magnetic Resonance Porosity |
|
MRP_ANT2_DH
| Antenna 2 Magnetic Resonance Porosity, Calculated Downhole |
|
MRP_DH
| Magnetic Resonance Porosity, Calculated Downhole |
|
MSPI
| Number of Magnetic Resonance Scans Per Index Interval |
|
NOIS_ANT2_DH
| Antenna 2 RMS Noise, Calculated Downhole |
|
NOISE_CT
| Coarse Tuning Noise |
|
NSE_A2_STK
| Antenna 2 RMS Noise with Stacking |
|
NSE_CT_A2
| Antenna 2 Coarse Tuning Noise |
|
PLUS_12V
| +12V Volt Power Supply Voltage |
|
POR_TEMP_CORR
| Temperature Correction for Porosity |
|
RING_E1_SM1
| First Echo Ringing Indicator, Sub-Measurement 1 |
|
RING_E1_SM2
| First Echo Ringing Indicator, Sub-Measurement 2 |
|
RING_E1_SM3
| First Echo Ringing Indicator, Sub-Measurement 3 |
|
RING_E1_SM4
| First Echo Ringing Indicator, Sub-Measurement 4 |
|
RING_E1_SM5
| First Echo Ringing Indicator, Sub-Measurement 5 |
|
RPM
| Rotational Speed |
|
RPM_M_SRPM
| Tool Rotational Velocity (RPM) Minus Standard Deviation (SRPM) |
|
RPM_P_SRPM
| Tool Rotational Velocity (RPM) Plus Standard Deviation (SRPM) |
|
SHKA
| Axial shock frequency |
|
SHKL_AXL
| Axial Shock Level |
|
SHKL_RAD
| Radial Shock Level |
|
SHKT
| Radial or transverse shock frequency |
|
SPHASE_DH
| Signal Phase, Calculated Downhole |
|
SPHASE_MR
| Signal Phase, from All Sub-Measurements |
|
SPHS_ANT2_DH
| Antenna 2 Signal Phase, Calculated Downhole |
|
SRPM
| RPM Standard Deviation |
|
STAT_MRQC
| Status Word Noise and Motion |
|
STAT_RTT2
| Status Word Real-Time T2 Distribution Quality |
|
T2_ITER_MAX
| T2 Distribution Decoding Hit Max Iterations Flag |
|
T2BFV_CUT
| Antenna Motion-Induced T2 Bound Fluid Volume Cutoff |
|
T2BFV_CUT_A2
| Antenna 2 Motion Induced T2 Bound Fluid Volume Cutoff |
|
T2CUTOFF_A2
| Antenna 2 T2 Cutoff |
|
T2DIST
| T2 Distribution of All Fluids |
|
T2LM_ANT2
| Antenna 2 T2 Logarithmic Mean |
|
T2LM_ANT2_DH
| Antenna 2 T2 Logarithmic Mean, Calculated Downhole |
|
T2LM_DH
| T2 Logarithmic Mean, Calculated Downhole |
|
T2MTN_LIM
| Antenna Motion-Induced T2 Limit for a Non-Relaxing Spin |
|
T2MTN_LIM_A2
| Antenna 2 Motion Induced T2 Limit for a Non-Relaxing Spin |
|
TAB_NMR
| Magnetic Resonance Antenna Time after Bit |
|
TICKS_ANT2
| Antenna 2 Tick Marks |
|
TICKS_NMR
| Nuclear Magnetic Resonance Measurement Tick Marks |
|
TNOISE
| Tool Hardware Noise per Echo. Averaged over Sub-Measurements |
|
TNOISE_DH
| Tool Hardware Noise per Echo. Averaged over Sub-Measurements, Calculated Downhole |
|
TSPD_A2
| Antenna 2 Time Samples per Depth |
|
TSTA
| Tool Status |
|
TUNE_WORD_A2
| Antenna 2 Tune Word Set for Tuning Relay |
|
WSUM_POR
| Window Porosity Sums |
