| Channel | Description |
|
ACTE
| Accelerometer Temperature |
|
ANGX
| Quadrant Calibration Angle |
|
ANGXCRS
| Angle X Calculated From Xceed Surveys Downhole |
|
ANGXPP
| Angle X Calculated From PowerPulse Downhole |
|
ANGXSRC
| Source of Angle X computed in PD Xceed |
|
AZIDES
| Desired Azimuth |
|
AZIM_CONT
| Continuous Hole Azimuth |
|
BX_ROT
| Rotating Magnetometer, X-Axis |
|
DCT
| Drill Cycle Time |
|
FSRATIO
| Fast Downlink Steering ratio |
|
GX_ROT
| Continuous Rotational Gravity X-axis |
|
INCL_CONT
| Continuous Inclination (Hole Deviation) |
|
INCLDES
| Desired Inclination |
|
RTF
| Raw Toolface |
|
SBX
| Magnetic X-Axis Reading, Stationary |
|
SBY
| Magnetic Y-Axis Reading, Stationary |
|
SBZ
| Magnetic Z-Axis Reading, Stationary |
|
SGX
| Gravity X-Axis Reading, Stationary |
|
SGY
| Gravity Y-Axis Reading, Stationary |
|
SGZ
| Gravity Z-Axis Reading, Stationary |
|
SHKL
| Tool Shock Level |
|
SHKLV
| Xceed Shock Level |
|
SRATIO
| Steering Ratio |
|
SSAMP
| Stick Slip Amplitude |
|
SSFRQ
| Stick Slip Frequency |
|
SSPCNT
| Stick Slip Percentage Indicator |
|
SSTIME
| Stick Slip Duration Indicator |
|
STKSLP
| Stick Slip Status Indicator |
|
TF
| Raw Toolface |
|
TFDES
| Raw Desired Toolface |
|
TFDS
| Desired Toolface Setting |
|
TFROTANG
| Rotating Mode Vector Angle |
|
TFROTMAG
| Rotating Mode Vector Magnitude |
|
TFSTRANG
| Steering Mode Vector Angle |
|
TFSTRMAG
| Steering Mode Vector Magnitude |
|
TFTOTANG
| Drill Cycle Vector Angle |
|
TFTOTMAG
| Drill Cycle Vector Magnitude |
|
TRJMODE
| PD Xceed Trajectory Mode |
|
TRPM
| MWD Turbine Rotation Speed |
|
TSTA
| Tool Status |
