| Channel | Description |
|
CAL1
| Caliper 1 |
|
CAL2
| Caliper 2 |
|
CAL3
| Caliper 3 |
|
CAL4
| Caliper 4 |
|
CRD1_PPC2
| PPC2 Radius 1 Arm Bending Compensated |
|
CRD2_PPC2
| PPC2 Radius 2 Arm Bending Compensated |
|
CRD3_PPC2
| PPC2 Radius 3 Arm Bending Compensated |
|
CRD4_PPC2
| PPC2 Radius 4 Arm Bending Compensated |
|
ECO_PPC2
| Ellipse Center Offset |
|
EHD1_PPC2
| PPC2 Enhanced Hole Diameter 1 (ellipse-based algorithm) |
|
EHD2_PPC2
| PPC2 Enhanced Hole Diameter 2 (ellipse-based algorithm) |
|
ELA_PPC2
| Ellipse Long Axis |
|
EMID_PPC2
| Ellipse Minimum Distance |
|
ERA_PPC2
| Angle between Ellipse Long Axis and Line of Caliper 1-3 |
|
ESA_PPC2
| Ellipse Short Axis |
|
ETC1_PPC2
| PPC2 Tool Center Position on the Caliper #1 and #3 log |
|
ETC2_PPC2
| PPC2 Tool Center Position on the Caliper #2 and #4 log |
|
HD1_PPC2
| PPC2 Hole Diameter 1 |
|
HD2_PPC2
| PPC2 Hole Diameter 2 |
|
HDOV_PPC2
| Hole Diameter from Oval |
|
LSR_PPC2
| Long and Short Axis Ratio |
|
OSDV_PPC2
| Oval Standard Deviation |
|
PHWA_PPC2
| Pad Hole-Wall Angle |
|
PWLIND_PPC2
| PPC2 Power Level Indicator |
|
RB_PPC2
| PPC2 Relative Bearing |
|
RD1_PPC2
| PPC2 Radius 1 |
|
RD2_PPC2
| PPC2 Radius 2 |
|
RD3_PPC2
| PPC2 Radius 3 |
|
RD4_PPC2
| PPC2 Radius 4 Calibrated |
|
REA_PPC2
| Relative Ellipse Azimuth |
|
SRD1_PPC2
| PPC2 Synthetic Radius 1 |
|
SRD2_PPC2
| PPC2 Synthetic Radius 2 |
