| Channel | Description |
|
ANGX
| Quadrant Calibration Angle |
|
AZIM
| Measured Azimuth |
|
AZIM_CONT
| Continuous Hole Azimuth |
|
AZIM_EU
| EU Converted Downhole-calculated Azimuth |
|
BATV_LD
| Loaded Battery Voltage |
|
BX_ROT
| Rotating Magnetometer, X-Axis |
|
CORR_INDEX
| Survey Station Correction Index |
|
CRPM
| Collar Rotational Speed |
|
CUREDT
| Current Equivalent Drilling Time in 10 Hours |
|
DEPTH_DNI
| Depth of the Direction and Inclination Sensor |
|
DIP
| Dip Angle |
|
GR
| Gamma Ray |
|
GR_CONF
| Gamma Ray Bit Confidence |
|
GRR
| Raw Gamma Ray |
|
GTF
| Gravity Toolface Angle |
|
GX_ROT
| Continuous Rotational Gravity X-axis |
|
HV_MAX
| High Voltage Maximum |
|
HV_MIN
| High Voltage Minimum |
|
INCL
| Hole inclination |
|
INCL_CONT
| Continuous Inclination (Hole Deviation) |
|
INCL_EU
| EU Converted Downhole-calculated Inclination |
|
INCL_RAW
| Uncorrected Survey Station Inclination |
|
MAV
| Minus Analog Voltage |
|
MSP1
| Spare MWD Channel #1 |
|
MSP2
| Spare MWD Channel #2 |
|
MSP3
| Spare MWD Channel #3 |
|
MSP4
| Spare MWD Channel #4 |
|
MSP5
| Spare MWD Channel #5 |
|
MTF
| Magnetic Toolface Angle |
|
NRPM
| Negative Rotation Indicator |
|
PAV
| Plus Analog Voltage |
|
QLTY
| Survey quality: GOOD or BAD versus criteria |
|
SAG_CORR
| Survey Station Sag Correction |
|
SBX
| Magnetic X-Axis Reading, Stationary |
|
SBY
| Magnetic Y-Axis Reading, Stationary |
|
SBZ
| Magnetic Z-Axis Reading, Stationary |
|
SDEP
| Station Depth |
|
SDEP_RAW
| Unmodified Survey Station Depth |
|
SEDT_SMWD
| SMWD Equivalent Drilling Time |
|
SGX
| Gravity X-Axis Reading, Stationary |
|
SGY
| Gravity Y-Axis Reading, Stationary |
|
SGZ
| Gravity Z-Axis Reading, Stationary |
|
SHK3TIME
| Time at Shock Level 3 |
|
SHKL
| Tool Shock Level |
|
SHKR
| Shock Rate |
|
SHKRSK
| Shock Risk |
|
SHOCKS_ACC
| Total Shocks accumulated over tool lifetime |
|
STAT
| Survey ACCEPTED/REJECTED status |
|
STICK
| Stick Slip Indicator |
|
STICKNSLIP
| Stick Slip Indicator |
|
STUCK
| Percent Time Stuck Below 5 RPM Indicator |
|
SVY_SOURCE
| Survey Station Source Tool |
|
SVY_USAGE
| Survey Usage Limitations Indicator |
|
TEMP_DNI
| Direction and Inclination Sensor Temperature |
|
TF_CONF
| Toolface Bit Confidence |
|
TOOLB
| Tool Magnetometer Magnitude from the Long Survey Axes |
|
TOOLBYZ
| Root-Mean-Square of the Long Survey By and Bz Axes |
|
TOOLG
| Tool Gravity Magnitude from the Long Survey Axes |
|
TOOLGYZ
| Root-Mean-Square of the Long Survey Gy and Gz Axes |
|
TSTA
| Tool Status |
|
TTEM
| Tool Temperature |
